|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Impressively thorough. Even the simple operators manual helped me "fix" one of the 2 CD players in the unit. This unit reads CD's from the top so they should be installed in the magazines "upside down" from typical CD players. The CD player service manual helped me unjam a stuck carriage because somebody transported the box laying down loaded with CD's. A little lens cleaning & the player now works well! Thanks for you help at a great price! Joe
;
I was skeptical at first but later found the manual to be good quality for the price. It took a couple hours to receive the email with the download link, well worth the wait. Thanks.
;
very helpful, I could not have cleaned motherboard and replaced the main fan without it
 ;
Good manual, schematics nice and clear with good quality scanning. Woul dhave been nice to have immediate access after purchasing though.
;
I was very glad recieving the service manal from You. Manuals were delivered promptly and were correct as advertised. A complete and very usefull service manual with all details. Thank you!
No SW_12VG
YES
No SW_FD(+)
YES
Is the VCC (14V) supplied to Q165 Collector?
YES
NO
Check D124 on SMPS Board and Replace
Is the VCC (FD+) supNO plied to Q163 Collector ?
YES
Check D121 on SMPS Board and Replace
Is there about 12.5V at NO ZD152 & Q165 Base?
YES
Check Q165 and Replace
Is there about 5.3V at R184 and Q153 Collector ?
YES
NO
Check Q163 and Replace
Is the VCC (33V) sup- NO plied to Q160 Emitor?
YES
Check D126 on SMPS Board and Replace
Is the VCC (5.3V) supplied to Q153 Emitor ?
YES
NO
Check 5.3VA on SMPS Board
Is there about 0V at NO Q160 Base?
YES
Check Q160 and Replace
Is there about 0V at Q153 Base ?
YES
NO
Check the �STANBY H� signal from µ-COM
Is there about 5.3V NO at Q166 Base?
YES
Check SW_5.3VA
Check Q153 and Replace
Check Q166 and Replace
No 1.8V
YES
No 1.25V
YES
Is the VCC (3.3V) supplied to Q159 NO Emitor And IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Is the VCC (2V) supplied NO to Q154 Emitor ?
YES
Check D155 and 2.5V power supply
Is there about 3V ~ 3.3V at Q159 Base and IC154 pin 3 ?
YES
NO
Check Q159 and Replace
Is there about 2V ~ 2.5V at Q154 Base and IC154 pin 4?
YES
NO
Check Q159 and Replace
Check IC154 and Replace
Is the VCC (3.3V) sup- NO plied IC154 pin 1,2,8 ?
YES
Check 3.3V power supply
Check IC154 and Replace 3-6
|
|
|
> |
|
